How to Increase Pendrive Data Transfer Speed

By MANSOOR in , on 9:42 AM with No comments

    

HOW TO INCREASE USB PENDRIVE DATA TRANSFER SPEED – BEST WAYS



As from the above reasons you can see that there are lot of different factors that determines the USB Pendrive data transfer speed and for these different factors we have different solutions or ways to increase USB Pendrive Data Transfer Speed that you can find below.

METHOD 1 – CHANGE THE FILE SYSTEM OF PENDRIVE

Changing the File System of Pendrive from “FAT-32″ to “NTFS” directly affects the pendrive overall data transfer speed.NTFS Mode helps in achieving faster and reliable data transfer speed as compared to FAT-32 because FAT 32 cannot handle large amounts of data. To change the file system from “FAT-32″ to “NTFS” follow the below given steps.
  • Connect your pendrive to your System
  • Right Click on Pendrive -> Select Format
  • Change the File System  from “FAT-32″ to “NTFS” as shown below.
Increase USB Pendrive Data Transfer Speed - 1
  • Check mark the Quick Format Option -> Click on Start
  • That’s all and now you can enjoy faster data transfer speeds.

METHOD 2 – CHECK PENDRIVE FOR ERRORS

It is often recommended to check pendrive for errors this will help in rectifying the bad data sectors thereby increasing the USB Pendrive data transfer speeds.
  • Connect your pendrive to your System
  • Right Click on Pendrive -> Select Properties
  • Navigate to Tools -> Here Under Error-Checking -> Click on Check Now
Increase USB Pendrive Data Transfer Speed - 2
  • That’s all and now you can enjoy faster data transfer speeds.

METHOD 3 – CHANGING DEVICE POLICIES

Changing the removal policy from Quick Removal to Better performance yields better data transfer speed but also puts your pendrive at damage risk so it all depends upon you whether to try or not though I have been using the for all my pendrives from last few years and never faced any issue thus far.
  • Connect your pendrive to your System
  • Right Click on Pendrive -> Select Properties
  • Select Hardware Tab -> Under All Disk Drives select the USB Pendrive -> Click on Properties
Increase USB Pendrive Data Transfer Speed - 3
  • Navigate to Policies Tab and Change removal policy from Quick Removal to Better performance -> Enable Write-Caching Policy
Increase USB Pendrive Data Transfer Speed - 4
  • That’s all and now you can enjoy faster data transfer speeds.
If you like this article please don’t forget to share it with your friends on Facebook or twitter just by clicking on the share button…..Thanks






























How to Root Galaxy S2 GT-i9100 Jelly Bean Android 4.1.1/4.1.2!

By MANSOOR in , on 9:24 AM with No comments

  How to Root Galaxy S2 GT-i9100 Jelly Bean Android        4.1.1/4.1.2!

  


For those of you who want to root your Galaxy S2 GT-i9100 on Jelly Bean Android 4.1.1 or Android 4.1.2, here’s how to do it easily using a custom kernel.
This rooting process is pretty safe to do, does not erase anything on your phone, it just installs a custom kernel (which comes with a custom recovery) and we root the phone using SU binary and Superuser app.  That’s it!
Step 1. Turn your Galaxy S2 GT-i9100 off.  Then hold down Volume Down, Center Home, and Power buttons together for about 3 seconds until you see the warning screen.

Step 2. Hit Volume Up (you will be in ODIN Download mode) then connect a micro-USB cable from your Galaxy S2 to your computer.
Step 3. Download Jeboo Kernel and ODIN package.  Leave the kernel file in .tar format but unzip (Don’t have unzipping program? Download and install 7Zip.) the ODIN zip files.
Download kernel:
Sponsored Links

Download Jeboo Kernel for GT-i9100 (thanks to Jeboo!)
Download ODIN:
Sponsored Links
Step 4. Run ODIN3v1.85.exe by double-clicking on it.  If you don’t see a yellow highlighted box with a random COM number, download and install Samsung USB Drivers.
Next, DON’T TOUCH ANYTHING ELSE but hit the “PDA” button.
Step 5. Choose the Jeboo kernel .tar file you downloaded earlier.
Step 6. Hit the “Start” button and this will start flashing the kernel.  Once it says “PASS!” your Galaxy S2 GT-i9100 should reboot.


Step 7. Once rebooted, download Superuser zip file straight to your phone or you can also copy it over from your computer.
Step 8. Turn your phone again then hold down Volume Up, Center Home, and Power buttons together for about 20 seconds until your phone reboots into CWM Recovery.
 
Step 9. Choose “Install Zip”.
Step 10. Choose “Choose zip from Internal sdcard” or “Choose zip from sdcard”. (Depending on where the Superuser zip file is)

Step 11. Find the Superuser zip file, it’s most likely in your download folder.
CWM-SuperSU-v0.99.zip if your super user zip file.
Step 12. Installing this file installs su binary and Superuser app to your Galaxy S2 GT-i9100, giving you full root access.
Reboot and you should find yourself with a SuperSU super user app.
You can download rooted apps like Titanium Backup app and get a super user pop up window when you try to run it for the first time.  Congratulations!  You’ve rooted your Galaxy S2 GT-i9100!!!
Like the tutorial?  PLEASE subscribe to my Zedomax YouTube channel, that would help me greatly and thank you!

Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! 

First time to rooting and custom ROMs? 

Please see our FAQ for your Galaxy S2 model FIRST!!!:

Earn Free Talktime 2014- Tricks

By MANSOOR in on 2:50 AM with No comments

             Free Talktime 2014- Tricks






You can earn free talktime in 2014 very easily. But all below tricks needs a android device or iPhone. If you don’t have an android or iPhone you can install below apps in android emulator like Bluestacks to run android apps and games on your PC. If you need help to install Bluestacks, just ask in the comments.


Earn Talktime By Installing Free Android Apps




kind of big companies spend lot of amount to promote their android application. But you can’t easily promote and earn money online if you don’t have a website! So i’m here sharing a app called Mcent. This app helps you to earn upto 100 rs talktime (approximately 2$) daily!
  • Signup for Mcent from here and install their android or iPhone application. I recommend you to visit this page from your smartphone and click on above link, open it on Googleplay. Install the application.
  • Open the app and enter your mobile number and verify it. After sign into your account, you can download android apps  and earn talktime free. Also you can earn talktime by referring friends.
After installing Mcent just Install& Refer these apps..  You will get talktime..
  1. Du Speed Booster
  2. Zopper
  3. GO Launcher EX
  4. Chifro ABC: Kids Alphabet Game


Earn Talktime By Sending Stickers To Group




LINE is a android application works almost like WhatsApp. But it offers lot more features such as free calls between LINE users, Freemium call to Mobiles and Land lines (needs LINE coins). Send at least one sticker to any group of 3 members or more daily to receive free talk time every 5 days. Continue sending stickers daily for 20 days to get as much as RS. 120/- worth of Free talktime.
  • Install LINE from here
  • Create a new group and add 3 members
  • Send a sticker daily to the group. You will  receive 30rs talk time every 5 days.
  • Also you can earn more Line talktime by installing Line Camera, LINE Deco and LINE Webtoon applications.


Earn Talktime By Calling  Your Friend For Free




WeChat is another messenger application for android and iPhone. The team is back with new free recharge offer called Friends n Rewards. This is similar above line messenger offer. It’s giving 150 Rs of free talktime just for doing voice or video call daily.
  • You must do a voice or video call with your friend on WeChat
  • You must send stickers daily to any friends or groups
  • Download WeChat from official Website and start earning talktime for free.
The offer is only valid for Indian customers between 1 September to 20 September 2014! You can earn maximum of Rs 150 and minimum 10 Rs free mobile recharge from this offer.
That’s all for now! If I find any other working free Talktime tricks, I’ll add it here. Also if you know any other working free recharge tricks, please share it in comments.
Windows 8: Automatically Shut Down Computer at Night

By MANSOOR in , on 8:49 AM with No comments

Windows 8: Automatically Shut Down Computer at Night



By using Window 8′s Task Manager you can easily schedule your computer to turn itself off at night when not in use.
Many people debate if computer systems are better to be left eternally on or if they should be powered down each night. For those of us who shut down their systems each night, you should know that you can schedule your computer to do this automatically. Windows is smart enough to do this only if the computer has been idle for your set amount of time.
Additionally, this is an excellent introduction to the Task Manager. This is one of the most popular tools of power users and can be used to schedule almost a limitless number of actions on your system.
1.First, search for “Schedule tasks” from the Start menu. 

2.The Task Scheduler window will come up. Here you must select Create Task… from the “Actions” banner on the right. 

3.Name your task, and then click on Triggers.

4.Under “Triggers,” select New… 

5.Set up the settings similar to what is pictured below. Click OK. 

6.Now, click on the Actions tab.

7.Under the “Actions” tab, select New…

8.Type in shutdown in the Program/script box. Then click OK. 

9.Finally, click on the Conditions tab.

10.Check the box next to Start the task only if the computer is idle for:, and then adjust the time intervals to fit your needs. Click OK. 

You have now scheduled a daily task. You can be sure that your computer will be turned off even if you are not there to initiate the shutdown.

Ghost keyboard Typing – Notepad Tricks

By MANSOOR in , on 10:41 PM with No comments

     Ghost keyboard Typing – Notepad Tricks


Hey guys , Today I am going to share with you a Short but Cool Notepad Trick. People Use notepad to type and save some important or regular information, But very less people know that there is much more that we can do with Notepad.
What if i say that we can make Notepad to type automatically what ever we wish to…. Unreal ? Yes it is possible and you will be doing it by yourself in just a few moments.You can show it to your friends and surprise them. Basically it is a prank that you can do with anyone just for fun.
This Process is Also known as ” Ghost Keyboard Typing ” Because you dont even touch your keyboard and words starts displaying in your notepad automatically, When you show this to your friend or anyone else, they will be excited to learn this from you as well.

Notepad trick to Type Automatically


Step 1: Right click on your desktop and select create new text document or simply Open Notepad.
Step 2: Exactly Copy the code given below and Paste it in notepad document that you have just created.
set wshshell = wscript.CreateObject(“wScript.Shell”)
wshshell.run “Notepad”
wscript.sleep 400
wshshell.sendkeys “S”
wscript.sleep 100
wshshell.sendkeys “M”
wscript.sleep 120
wshshell.sendkeys “A”
wscript.sleep 200
wshshell.sendkeys “R”
wscript.sleep 100
wshshell.sendkeys “T”
wscript.sleep 140
wshshell.sendkeys “T”
wscript.sleep 100
wshshell.sendkeys “R”
wscript.sleep 50
wshshell.sendkeys “I”
wscript.sleep 120
wshshell.sendkeys “C”
wscript.sleep 170
wshshell.sendkeys “K”
wscript.sleep 100
wshshell.sendkeys “S”
wscript.sleep 50
wshshell.sendkeys “.”
wscript.sleep 120
wshshell.sendkeys “N”
wscript.sleep 160
wshshell.sendkeys “E”
wscript.sleep 200
wshshell.sendkeys “T”
wscript.sleep 100
Step 3: Save the above code in Notepad file As ” smarttricks.vbs ” (Without Quotes ) but make sure  While saving this file select Save as type  “All files” and extension must be .vbs
Step 4: Now double click on The saved File, You will see “SMARTTRICKS.NET ” will be typed  Automatically, This is one of the Most awesome Notepad Trick that You learned today. Moreover  you can edit the Words In the above given Code with any desired words you want Notepad to type for you. e.g. : MY FRIEND READING THIS IS FOOL..vb

IMPORTANT !!!
While Double Clicking on the saved file if you see an error box like ” line 1 ” and “Char 37” Then dont worry, Right click on smarttricks.vbs and click on edit,
Now delete all Double quotations ie : ”  and Type them all manually from your keyboard, save it and now you will have no errors. 
Customize folders with different colors in Windows

By MANSOOR in on 9:48 PM with No comments


           Customize folders with different colors in Windows



There are many softwares available today over the internet which can Customize your Computer in an efficient manner that it looks so attractive as well as it becomes very easy to use. We always want our computer to be clean and well organized so that whenever we need to access something or need to search a particular file/folder in our computer we could find it easily.


Also Read  :How To Create Run Commands in Windows



As similar to that, here I am going to share a software through which you can easily assign your favorite colors to your desired folders in order to differentiate them easily and to ease of access.





How do i Customize folders with different colors ?


Just follow the two simple steps given below to customize your folder :

Step 1 :

First of all Download and install the software FolderColorizer. It is tested and 100% virus free. You can download it from here : DOWNLOAD FOLDERCOLORIZER

Step 2 :

Now after installing the software, simply right click on any folder which you wish to customize. Here when you right click on folder, you will see a new option in the context menu i.e. Colorize !. Now simply go to that option and one submenu will appear. Now choose any color you want to assign to this folder.
Although it is a free software for everyone to use it but while you will use this software for the very first time , it will just ask your email id for activation of this software. But no need to worry because you wont need to confirm the activation by logging in to your e mail account. Even if you don’t wish to share your e mail id with developers of this software you can do it because product will be activated automatically once you enter any email id. So you can also enter any fake id if you want.
For your convenience I am providing you a screenshot of above mentioned procedure for changing folder color :

In this way you will be able to easily organize folders in any of your drive weather C: , D: or any other drive. You can also assign different colors to several folders in the same drive to give it more attractive and cool looks.
How To Create Run Commands in Windows

By MANSOOR in on 9:34 PM with No comments

       

                How To Create Run Commands in Windows




There is no doubt that Microsoft Windows is the most widely used operating system in all parts of the world. Apart from being simple to use, it is quite rich in features as well, which makes our lives quite easy.
The Run command available on Windows operating system is one such power packed feature that lets you to open a document or an application instantly with the help of just 1 command. So, rather than clicking several icons or using multiple commands, you can use the Run command to open any program or document instantly. For that you will need to Create Run Commands for any software of your Choice which you use Frequently.

But, do you know how to Create Run Commands of your Own? Well, it is really easy, which involves just few steps. Through this article, I will help you understand how to access your favorite applications by creating custom Run commands.

 Open Run Command:

Before I show you how to create your own Run commands, let’s take a quick look on how to open Run Command. First of all, you need to open the Run window by just pressing the Windows Key along with the R key, i.e. Windows + R. Now, you have to type the name of the program that you desire to open up or execute. Unfortunately, not all programs can be accessed through this method. So, let me show you how to create Run commands that do not come as inbuilt commands.

Steps to Create run commands of your own

Step 1. The first step is to select the software or application for which you want to make custom Run command. For example, let us consider Google Chrome as the example here. Remember, you can choose any application other than which is already there in the Run command.

Step 2. In the second step, right click on the desktop of your computer system and make a new shortcut.
Right click > New > Shortcut
Step 3. As you select the Shortcut option in the 2nd Step, it will open up a dialog box. And, the dialog box will ask you path of the application or software for which you want to create the Run command.
Step 4. Now, you need to browse through the files and choose the one that shows “chrome.exe”. Well, it is quite obvious that all the executable files can be found in the C drive (or wherever the Operating System has been installed), inside the folder “Program Files”. For example, “C:\Program Files\Google Chrome\chrome.exe”
Step 5. Once you are done with Step number 4, just click on “Next” button and simply provide a relative name to that shortcut. Remember, the same name will be used later in the Run command.
For example, “GC” for Google Chrome
Step 6. Now, click on the “Finish” button. Once it is done, an icon related to that application or software will show up on your computer’s screen. It means that the process of creating shortcut has been done successfully.
Step 7. In this step, just cut and paste that recently made shortcut icon into your computer’s root drive, in its Windows folder.
For example, C:\ Windows , Make sure you are the administrator of the computer or have its password.
Step 8. Now, you are done with the set up and can run the application through Run Command. Just go to Run and enter the keyword “GC”, and Google Chrome will begin executing.
So this was a Short but Usefull Tutorial to Create Run Commands for any software in windows,I Hope this Post will Easeup your Work, Stay Tuned and Subscribe to this Blog to Recieve Updates Everytime a New article is posted. Subscribe Box.

Related post :  How to make your own command prompt

Subscribe to: Posts (Atom)