no image

By MANSOOR in , on 11:44 PM with No comments

[Root Guide] How to Root Micromax Unite 2 A106 Kitkat Phone








Micromax Unite 2 A106 is a budget android Kitkat (V4.4.2) smartphone which was recently launched by Micromax. It is packed with quite good specifications. Before going further I’ll like to point a thing that Rooting voids phone’s warranty but once you have rooted it you can unroot it anytime too.
Root Micromax A106 Unite 2
Rooting is confusing for all newbies, but by following the below guide you can easily get your facts and doubts clear and can successfully root your Micromax Unite 2 Specfication
Also Check: Rooting Micromax Phones Frequently Asked Questions 
                
 So now we’ll move towards the procedure of rooting but before it there are some goodies that you will need to download.
And last but not the least
And Make Sure your device has at least 75% + battery and you have enabled USB Debugging. If not Go To Setting–>About Phone–>Tap the build number 4-5 times and that will enable Developer Settings in case it is not present by default. Else you can find the developer option simply by visiting the settings option.
Now we’ll go ahead towards the rooting procedure.
How To Root Micromax A106 Unite 2?
Follow the below guide properly to root the device.

  1. Install the USB Drivers If they are not already installed on your PC.
  2. Copy the SuperSU File on your device’s internal memory, don’t keep it in any folder just let it be there.
  3. Pull out the device’s battery, and while it’s turned off connect it to your computer via USB cable.
  4. Extract out all the files of SP flash too, and double-click on Flash_Tool.exe to open it.
  5. Click On the scatter loading button and select the “Scatter File” that you just downloaded. The real name of the file is “MT6582_Android_scatter_emmc.txt”.
  6. This will then load up a new section in the region below where you’ll be able to see a lot of check boxes just click on BOOTIMG text and select the boot image you just downloaded and then follow the same procedure for RECOVERY text and select the recovery.
  7. Click on the download button and there will be a warning popped up but don’t worry about it and  Congratulations you have successfully installed CWM Recovery on your Unite 2.
  8. Now all you have to do is boot up into recovery and you can do that by pressing and holding Volume up+Volume down+power key simultaneously. Then select the recovery mode and select install ZIP from SD card and then use the volume rockers to scroll up and down and power button to make a selection.
  9. Select the SuperSU.zip that you placed in your phone.
And in this way you can successfully root your device.
If you still have any query, please let us know via a comment.

Also Check:     Unroot Micromax unite2
Root & Un-root Micromax Unite 2

By MANSOOR in , on 11:36 PM with No comments

                Root & Un-root Micromax Unite 2 – Guide





Rooting is the process of gaining administrative rights on your Android device and once we root our Android device, we can then make changes to it to customize it well beyond what it normally can do. But it cost us the warranty of the device which most of don’t like and this is the reason why rooting is not so widely popular in application. But there is also a procedure to un-root any device and after that one can get its device’s warranty back.

Un-rooting is the process of removing root access, a custom recovery and just trying to get the device back to as close to stock as possible. So in this article we will teach you both to root and un-root Micromax Unite 2. The procedure is given below under separate heads.

micromax_unite_2-rppt-unroot copy

Warning – Rooting voids the warranty of the device but after un-rooting you can get it back.

Pre-requisite:

Step 1: Data’s are precious, therefore you should fully backup your Android device before rooting it. Facing problem? Then, read our article on How to Backup and Restore Apps/ Games/ Cache Data using Titanium Backup – Detailed guide


Step 2: You will have enable USB Debugging on your device. To do so, go to “Settings > Applications > Development > USB debugging”. The checkbox beside USB Debugging should be ticked.


Step 3: You should charge your device so that there is 60% or more amount of battery charge on your device. Read our article on How to Improve Battery life of your Android device 10 steps guide.


Step 4: You will have to disable security apps and programs like Antivirus and Firewall from your device for the time being i.e. Until the rooting procedure has completed.


Step 5: Download USB Drivers (ADB and Fastboot) for your Android device to make it compatible with Windows.

How to root Micromax Unite 2

Note

    We won’t be held responsible if you end-up bricking or damaging your device so perform it at your own risk.
    This procedure should only work on Windows based PCs.
    This procedure flashes a custom recovery as well.

Downloads


    You should have required drivers installed on your PC and if you haven’t, you can download and install the latest drivers from this link.If not working try these too PDAnet_4150.rar
    Download SP Flash Tool and save it to your desktop.
    Download Android Scatter File and save it to your desktop.
    Download Custom Recovery and save it to your desktop.
    Download SuperSU and save it to your desktop.

Procedure

Step 1- Extract files from SP Flash Tool to your desktop by right-clicking on it and selecting Extract here.

Step 2 – Plug in your device to your PC via USB cable and copy SuperSU from your desktop over to the root of your SD card.

Step 3- Unplug your device from your PC.

Step 4 – Double-click on SP Flash Tool executable and it’ll open.

Step 5 – Click on Scatter-loading and choose the Android Scatter File you have placed on your desktop.

Step 6 – Click on Recovery in the tool and choose the Custom Recovery file available on your desktop and click Download button in the tool.

Step 7 – Turn OFF your device and pull the battery out of your device.

Step 8 – Plug in your device to your PC without inserting the battery and the tool should automatically start flashing the recovery on your device.

Step 9 – When the recovery’s flashed, put the battery back in your device. Hold down Volume UP, Volume DOWN, and Power buttons together and then press Volume UP and you should be in recovery mode.

Step 10 – Tap on Install

Step 11 – Choose the SuperSU file you copied earlier to be flashed on your device and it’ll start flashing the file on your device.

Step 12 – When the file is flashed, reboot your device and it’s all done.
How to un-root Micromax Unite 2

Note

    You must have a custom recovery in order to do this procedure. If you used the procedure on our site to root your device, you already have a custom recovery.
    The procedure should flash the stock firmware on your device.

Procedure

Step 1- Download the recovery flash able stock firmware for your device and save it to your desktop.

Step 2 – Connect your device to your PC using the USB cable and copy Stock Firmware from your desktop over to the root of your SD card. It’s the topmost folder on your SD card.

Step 3 – When it’s copied, disconnect your device from your PC and head over to the Google Play Store and download and install Quick Boot on your device.

Step 4 – Launch the newly installed app on your device and tap on Recovery.

Step 5 – Your device should reboot into recovery mode.

Step 6 – Select Install and then select the Stock Firmware .zip file to be flashed on your device.

Step 7 – Hit yes when prompted and it’ll start flashing the firmware on your device.

Step 8 – When the firmware is flashed, reboot your device and it’s all done.

This is all what one has to do to root and un-root his/her Micromax Unite 2. The procedure is simple and easy to follow.


How to Increase Pendrive Data Transfer Speed

By MANSOOR in , on 9:42 AM with No comments

    

HOW TO INCREASE USB PENDRIVE DATA TRANSFER SPEED – BEST WAYS



As from the above reasons you can see that there are lot of different factors that determines the USB Pendrive data transfer speed and for these different factors we have different solutions or ways to increase USB Pendrive Data Transfer Speed that you can find below.

METHOD 1 – CHANGE THE FILE SYSTEM OF PENDRIVE

Changing the File System of Pendrive from “FAT-32″ to “NTFS” directly affects the pendrive overall data transfer speed.NTFS Mode helps in achieving faster and reliable data transfer speed as compared to FAT-32 because FAT 32 cannot handle large amounts of data. To change the file system from “FAT-32″ to “NTFS” follow the below given steps.
  • Connect your pendrive to your System
  • Right Click on Pendrive -> Select Format
  • Change the File System  from “FAT-32″ to “NTFS” as shown below.
Increase USB Pendrive Data Transfer Speed - 1
  • Check mark the Quick Format Option -> Click on Start
  • That’s all and now you can enjoy faster data transfer speeds.

METHOD 2 – CHECK PENDRIVE FOR ERRORS

It is often recommended to check pendrive for errors this will help in rectifying the bad data sectors thereby increasing the USB Pendrive data transfer speeds.
  • Connect your pendrive to your System
  • Right Click on Pendrive -> Select Properties
  • Navigate to Tools -> Here Under Error-Checking -> Click on Check Now
Increase USB Pendrive Data Transfer Speed - 2
  • That’s all and now you can enjoy faster data transfer speeds.

METHOD 3 – CHANGING DEVICE POLICIES

Changing the removal policy from Quick Removal to Better performance yields better data transfer speed but also puts your pendrive at damage risk so it all depends upon you whether to try or not though I have been using the for all my pendrives from last few years and never faced any issue thus far.
  • Connect your pendrive to your System
  • Right Click on Pendrive -> Select Properties
  • Select Hardware Tab -> Under All Disk Drives select the USB Pendrive -> Click on Properties
Increase USB Pendrive Data Transfer Speed - 3
  • Navigate to Policies Tab and Change removal policy from Quick Removal to Better performance -> Enable Write-Caching Policy
Increase USB Pendrive Data Transfer Speed - 4
  • That’s all and now you can enjoy faster data transfer speeds.
If you like this article please don’t forget to share it with your friends on Facebook or twitter just by clicking on the share button…..Thanks






























How to Root Galaxy S2 GT-i9100 Jelly Bean Android 4.1.1/4.1.2!

By MANSOOR in , on 9:24 AM with No comments

  How to Root Galaxy S2 GT-i9100 Jelly Bean Android        4.1.1/4.1.2!

  


For those of you who want to root your Galaxy S2 GT-i9100 on Jelly Bean Android 4.1.1 or Android 4.1.2, here’s how to do it easily using a custom kernel.
This rooting process is pretty safe to do, does not erase anything on your phone, it just installs a custom kernel (which comes with a custom recovery) and we root the phone using SU binary and Superuser app.  That’s it!
Step 1. Turn your Galaxy S2 GT-i9100 off.  Then hold down Volume Down, Center Home, and Power buttons together for about 3 seconds until you see the warning screen.

Step 2. Hit Volume Up (you will be in ODIN Download mode) then connect a micro-USB cable from your Galaxy S2 to your computer.
Step 3. Download Jeboo Kernel and ODIN package.  Leave the kernel file in .tar format but unzip (Don’t have unzipping program? Download and install 7Zip.) the ODIN zip files.
Download kernel:
Sponsored Links

Download Jeboo Kernel for GT-i9100 (thanks to Jeboo!)
Download ODIN:
Sponsored Links
Step 4. Run ODIN3v1.85.exe by double-clicking on it.  If you don’t see a yellow highlighted box with a random COM number, download and install Samsung USB Drivers.
Next, DON’T TOUCH ANYTHING ELSE but hit the “PDA” button.
Step 5. Choose the Jeboo kernel .tar file you downloaded earlier.
Step 6. Hit the “Start” button and this will start flashing the kernel.  Once it says “PASS!” your Galaxy S2 GT-i9100 should reboot.


Step 7. Once rebooted, download Superuser zip file straight to your phone or you can also copy it over from your computer.
Step 8. Turn your phone again then hold down Volume Up, Center Home, and Power buttons together for about 20 seconds until your phone reboots into CWM Recovery.
 
Step 9. Choose “Install Zip”.
Step 10. Choose “Choose zip from Internal sdcard” or “Choose zip from sdcard”. (Depending on where the Superuser zip file is)

Step 11. Find the Superuser zip file, it’s most likely in your download folder.
CWM-SuperSU-v0.99.zip if your super user zip file.
Step 12. Installing this file installs su binary and Superuser app to your Galaxy S2 GT-i9100, giving you full root access.
Reboot and you should find yourself with a SuperSU super user app.
You can download rooted apps like Titanium Backup app and get a super user pop up window when you try to run it for the first time.  Congratulations!  You’ve rooted your Galaxy S2 GT-i9100!!!
Like the tutorial?  PLEASE subscribe to my Zedomax YouTube channel, that would help me greatly and thank you!

Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! 

First time to rooting and custom ROMs? 

Please see our FAQ for your Galaxy S2 model FIRST!!!:

Earn Free Talktime 2014- Tricks

By MANSOOR in on 2:50 AM with No comments

             Free Talktime 2014- Tricks






You can earn free talktime in 2014 very easily. But all below tricks needs a android device or iPhone. If you don’t have an android or iPhone you can install below apps in android emulator like Bluestacks to run android apps and games on your PC. If you need help to install Bluestacks, just ask in the comments.


Earn Talktime By Installing Free Android Apps




kind of big companies spend lot of amount to promote their android application. But you can’t easily promote and earn money online if you don’t have a website! So i’m here sharing a app called Mcent. This app helps you to earn upto 100 rs talktime (approximately 2$) daily!
  • Signup for Mcent from here and install their android or iPhone application. I recommend you to visit this page from your smartphone and click on above link, open it on Googleplay. Install the application.
  • Open the app and enter your mobile number and verify it. After sign into your account, you can download android apps  and earn talktime free. Also you can earn talktime by referring friends.
After installing Mcent just Install& Refer these apps..  You will get talktime..
  1. Du Speed Booster
  2. Zopper
  3. GO Launcher EX
  4. Chifro ABC: Kids Alphabet Game


Earn Talktime By Sending Stickers To Group




LINE is a android application works almost like WhatsApp. But it offers lot more features such as free calls between LINE users, Freemium call to Mobiles and Land lines (needs LINE coins). Send at least one sticker to any group of 3 members or more daily to receive free talk time every 5 days. Continue sending stickers daily for 20 days to get as much as RS. 120/- worth of Free talktime.
  • Install LINE from here
  • Create a new group and add 3 members
  • Send a sticker daily to the group. You will  receive 30rs talk time every 5 days.
  • Also you can earn more Line talktime by installing Line Camera, LINE Deco and LINE Webtoon applications.


Earn Talktime By Calling  Your Friend For Free




WeChat is another messenger application for android and iPhone. The team is back with new free recharge offer called Friends n Rewards. This is similar above line messenger offer. It’s giving 150 Rs of free talktime just for doing voice or video call daily.
  • You must do a voice or video call with your friend on WeChat
  • You must send stickers daily to any friends or groups
  • Download WeChat from official Website and start earning talktime for free.
The offer is only valid for Indian customers between 1 September to 20 September 2014! You can earn maximum of Rs 150 and minimum 10 Rs free mobile recharge from this offer.
That’s all for now! If I find any other working free Talktime tricks, I’ll add it here. Also if you know any other working free recharge tricks, please share it in comments.
Windows 8: Automatically Shut Down Computer at Night

By MANSOOR in , on 8:49 AM with No comments

Windows 8: Automatically Shut Down Computer at Night



By using Window 8′s Task Manager you can easily schedule your computer to turn itself off at night when not in use.
Many people debate if computer systems are better to be left eternally on or if they should be powered down each night. For those of us who shut down their systems each night, you should know that you can schedule your computer to do this automatically. Windows is smart enough to do this only if the computer has been idle for your set amount of time.
Additionally, this is an excellent introduction to the Task Manager. This is one of the most popular tools of power users and can be used to schedule almost a limitless number of actions on your system.
1.First, search for “Schedule tasks” from the Start menu. 

2.The Task Scheduler window will come up. Here you must select Create Task… from the “Actions” banner on the right. 

3.Name your task, and then click on Triggers.

4.Under “Triggers,” select New… 

5.Set up the settings similar to what is pictured below. Click OK. 

6.Now, click on the Actions tab.

7.Under the “Actions” tab, select New…

8.Type in shutdown in the Program/script box. Then click OK. 

9.Finally, click on the Conditions tab.

10.Check the box next to Start the task only if the computer is idle for:, and then adjust the time intervals to fit your needs. Click OK. 

You have now scheduled a daily task. You can be sure that your computer will be turned off even if you are not there to initiate the shutdown.

Ghost keyboard Typing – Notepad Tricks

By MANSOOR in , on 10:41 PM with No comments

     Ghost keyboard Typing – Notepad Tricks


Hey guys , Today I am going to share with you a Short but Cool Notepad Trick. People Use notepad to type and save some important or regular information, But very less people know that there is much more that we can do with Notepad.
What if i say that we can make Notepad to type automatically what ever we wish to…. Unreal ? Yes it is possible and you will be doing it by yourself in just a few moments.You can show it to your friends and surprise them. Basically it is a prank that you can do with anyone just for fun.
This Process is Also known as ” Ghost Keyboard Typing ” Because you dont even touch your keyboard and words starts displaying in your notepad automatically, When you show this to your friend or anyone else, they will be excited to learn this from you as well.

Notepad trick to Type Automatically


Step 1: Right click on your desktop and select create new text document or simply Open Notepad.
Step 2: Exactly Copy the code given below and Paste it in notepad document that you have just created.
set wshshell = wscript.CreateObject(“wScript.Shell”)
wshshell.run “Notepad”
wscript.sleep 400
wshshell.sendkeys “S”
wscript.sleep 100
wshshell.sendkeys “M”
wscript.sleep 120
wshshell.sendkeys “A”
wscript.sleep 200
wshshell.sendkeys “R”
wscript.sleep 100
wshshell.sendkeys “T”
wscript.sleep 140
wshshell.sendkeys “T”
wscript.sleep 100
wshshell.sendkeys “R”
wscript.sleep 50
wshshell.sendkeys “I”
wscript.sleep 120
wshshell.sendkeys “C”
wscript.sleep 170
wshshell.sendkeys “K”
wscript.sleep 100
wshshell.sendkeys “S”
wscript.sleep 50
wshshell.sendkeys “.”
wscript.sleep 120
wshshell.sendkeys “N”
wscript.sleep 160
wshshell.sendkeys “E”
wscript.sleep 200
wshshell.sendkeys “T”
wscript.sleep 100
Step 3: Save the above code in Notepad file As ” smarttricks.vbs ” (Without Quotes ) but make sure  While saving this file select Save as type  “All files” and extension must be .vbs
Step 4: Now double click on The saved File, You will see “SMARTTRICKS.NET ” will be typed  Automatically, This is one of the Most awesome Notepad Trick that You learned today. Moreover  you can edit the Words In the above given Code with any desired words you want Notepad to type for you. e.g. : MY FRIEND READING THIS IS FOOL..vb

IMPORTANT !!!
While Double Clicking on the saved file if you see an error box like ” line 1 ” and “Char 37” Then dont worry, Right click on smarttricks.vbs and click on edit,
Now delete all Double quotations ie : ”  and Type them all manually from your keyboard, save it and now you will have no errors. 
Subscribe to: Posts (Atom)